Remedial +
Leak Solutions
IDENTIFY || RECTIFY || PREVENT || IDENTIFY
IDENTIFY. RECTIFY. PREVENT.
Waterproofing failures are often not caused by a single issue — typically they result from broader problems, including substrates, drainage, movement, sequencing, structural conditions, and construction detailing.
Effective remediation requires more than waterproofing expertise alone.
As highly experienced builders and licensed trades, we understand the broader construction ecosystem surrounding waterproofing performance — allowing us to accurately identify root causes, assess contributing factors, and develop technically sound long-term solutions beyond surface-level repairs. Were required, we can also provide associated construction rectification works as part of a complete remedial solution.
The result is accurate diagnosis, smarter remediation strategies, and waterproofing systems designed to properly resolve failures — not simply conceal them temporarily.
IDENTIFY || RECTIFY || PREVENT || IDENTIFY || RECTIFY || PREVENT
Waterproofing failures are often not caused by a single issue — typically they result from broader problems, including substrates, drainage, movement, sequencing, structural conditions, and construction detailing.
Effective remediation requires more than waterproofing expertise alone.
As highly experienced builders and licensed trades, we understand the broader construction ecosystem surrounding waterproofing performance — allowing us to accurately identify root causes, assess contributing factors, and develop technically sound long-term solutions beyond surface-level repairs. Were required, we can also provide associated construction rectification works as part of a complete remedial solution.
The result is accurate diagnosis, smarter remediation strategies, and waterproofing systems designed to properly resolve failures — not simply conceal them temporarily.
|| IDENTIFY || RECTIFY || PREVENT || IDENTIFY ||
Services
Advanced leak detection and investigative assessment to identify the true source of waterproofing failure.
We utilise moisture testing, thermal imaging, system analysis, and detailed inspections to accurately diagnose concealed issues before rectification begins.Targeted remediation solutions for deteriorated internal and external wet areas.
We assess and rectify moisture ingress, failed detailing, drainage issues, and system deterioration to restore long-term waterproofing performance and building integrity.Technical rectification of failed or non-compliant waterproofing systems.
We identify underlying causes of failure and implement compliant, long-term solutions designed to prevent recurring issues, water ingress, and associated building damage.
Specialist repair systems for active leaks, structural cracks, and below-ground moisture ingress.
We apply technically sound injection and pressure-management solutions to stop water penetration at its source and restore long-term performance.
Remedial waterproofing and reconstruction for deteriorated balconies, terraces, bathrooms, laundries, and exposed wet areas.
We assess drainage, substrates, detailing, movement, and membrane performance to deliver compliant, long-term rectification outcomes and reliable waterproofing performance.
Removal, replacement, and upgrading of failed or outdated waterproofing systems.
We design and install compliant modern systems tailored to the specific exposure conditions, structural movement, and performance requirements of each project.
Solutions for persistent moisture intrusion, rising damp, joint failure, and structural movement-related defects.
We identify contributing building conditions and implement integrated remediation strategies that address both the underlying cause and the visible symptoms — delivering long-term protection and performance.
Approach
INVESTIGATION-LED.
ENGINEERED FOR
LONG-TERM RESULTS.
Performance-Focused. Built Around Root Cause Resolution.
Remedial waterproofing requires more than surface-level repairs. Our process is designed to identify the true source of failure, assess the wider building conditions, and implement technically sound long-term solutions.
01
We undertake detailed leak investigations, moisture testing, thermal imaging, and system assessments to identify the true source and extent of failure.
This allows us to understand not only where the issue appears — but why it is occurring.
02
We assess substrates, detailing, movement, drainage, membrane condition, environmental exposure, and previous installation methods against compliance and performance requirements.
This helps identify underlying causes, contributing factors, and points of system failure.
03
Every remediation plan is tailored to the specific conditions of the project and designed around long-term performance, compatibility, and constructability.
We focus on technically correct solutions — not short-term patch repairs.
04
Rectification works are completed using compliant systems, controlled installation methods, ongoing inspections, and performance verification throughout the remediation process.
Testing, inspections, and documentation help ensure the system performs as intended both during installation and after completion.
05
All works are supported by photographic documentation, reporting, compliance records, and structured handover information for future assurance and traceability.
The result is a verified remedial solution built for long-term protection and performance.
DID YOU KNOW . DID YOU KNOW . DID YOU KNOW . DID YOU KNOW . DID YOU KNOW
DID YOU KNOW . DID YOU KNOW . DID YOU KNOW . DID YOU KNOW . DID YOU KNOW . DID YOU KNOW . DID YOU KNOW .
DID YOU KNOW . DID YOU KNOW . DID YOU KNOW
-
Australian Standards
The Australian Standards require mandatory inspection stages, membrane verification, compliant detailing, and overlay inspections before finishes are applied. -
Mandatory Testing + Verification
Membrane continuity, dry film thickness (DFT), curing, termination heights, penetrations, and waterstops must be visually inspected and verified prior to overlay and handover. -
NCC Compliance
Waterproofing systems must comply with National Construction Code performance requirements to prevent water ingress into concealed building cavities and structural elements. -
Overlay Stage Inspections
The Australian Standards require waterproofing systems to be inspected at overlay stage to identify pinholes, membrane defects, inadequate curing, and installation inconsistencies before concealment. -
Flood Testing Requirements
Where flood testing is undertaken, membranes must reach full cure prior to water exposure to ensure accurate performance verification. -
Documentation + Certification
Inspection records, testing outcomes, photographic evidence, waterproofing certificates, and compliance documentation are critical parts of waterproofing quality assurance and certification processes.
-
-
Correct Dry Film Thickness (DFT)
Membranes must achieve manufacturer-specified dry film thickness to ensure durability, flexibility, and long-term waterproofing performance. -
Moisture + Curing Control
Substrate moisture levels, ambient conditions, and curing must be monitored to prevent membrane failure, delamination, and trapped moisture issues. -
System Compatibility
Primers, membranes, sealants, bond breakers, substrates, and finishes must be compatible and installed in accordance with technical data sheets and Australian Standards. -
Critical Detailing Requirements
Penetrations, junctions, movement joints, drainage connections, waterstops, and vertical terminations are among the highest-risk failure points and require precise compliant detailing. -
Continuous Membrane Integrity
Waterproofing systems must maintain full continuity without pinholes, splits, voids, shrinkage defects, or inadequate transitions before overlay and completion. -
Falls, Drainage + Water Management
Correct falls, drainage design, and surface preparation are critical to preventing ponding water, hydrostatic pressure, and premature system deterioration. -
Environmental + Site Monitoring
Weather exposure, temperature, humidity, and changing site conditions can significantly impact membrane performance and curing behaviour during installation. -
Performance Verification
Testing, inspections, thermal imaging, moisture assessment, and flood testing help verify that the installed system performs as intended before handover.
-
-
Verification at Every Stage
Waterproofing systems should be inspected, assessed, and verified throughout preparation, installation, curing, and completion—not just at handover. -
Testing Before Concealment
Critical checks should occur before foot traffic is present and overlays, screeds, tiles, and finishes conceal the waterproofing system and limit defect visibility. -
Moisture Verification
Substrate moisture testing helps confirm surfaces are within acceptable tolerances prior to membrane application and overlay. -
Flood Testing + System Integrity
Flood testing helps verify membrane continuity, drainage performance, and overall system integrity under controlled conditions. -
Thermal Imaging + Leak Detection
Advanced diagnostic testing assists in identifying hidden moisture ingress, active leaks, and concealed waterproofing failures. -
Photographic + Digital Records
Structured photographic documentation and reporting provide transparency, traceability, and long-term project accountability. -
Compliance Verification
System installation, detailing, curing, and product application should be verified against NCC provisions, Australian Standards, and manufacturer specifications. -
Certified Handover Documentation
Testing outcomes, inspection records, warranties, certifications, and compliance documentation provide assurance at completion and into the future.
-
-
Full Cure Before Flood Testing
Membranes must reach full cure before exposure to water or flood testing to ensure accurate performance verification. -
Ambient Conditions Matter
Temperature, humidity, ventilation, and weather conditions can significantly affect membrane curing times and overall system performance. -
Premature Overlay Risks
Applying screeds, adhesives, tiles, or finishes before proper curing can trap moisture and compromise membrane integrity and adhesion. -
Manufacturer-Specified Cure Times
Every waterproofing system has specific curing and recoat requirements that must be followed in accordance with technical data sheets. -
Moisture Entrapment Prevention
Incorrect curing conditions can lead to blistering, debonding, membrane shrinkage, and long-term waterproofing failure. -
Critical Verification Stage
Curing stages should be monitored and verified before overlay, flood testing, or handover to ensure the system performs as designed. -
Environmental Monitoring
Continuous assessment of site conditions helps ensure curing performance remains consistent throughout installation. -
System Performance Depends on Cure Quality
Correct curing is critical to achieving membrane flexibility, adhesion, continuity, and long-term durability.
-
-
Most Failures Remain Hidden
Waterproofing defects often develop behind tiles, screeds, walls, and concealed building cavities long before visible signs appear. -
Damage Starts Before Detection
By the time leaks become visible, moisture intrusion has often already affected substrates, adhesives, framing, insulation, and structural elements. -
Common Hidden Defects
Insufficient membrane thickness, trapped moisture, failed detailing, membrane voids, poor curing, and non-compliant penetrations are among the most common concealed failures. -
Concealed Water Ingress Risks
Undetected moisture can lead to mould growth, material deterioration, corrosion, delamination, and long-term structural damage. -
Overlay Concealment
Once tiles, screeds, and finishes are installed, identifying the original source of failure becomes significantly more difficult and costly. -
Testing Reduces Risk
Moisture testing, thermal imaging, flood testing, and overlay inspections help identify hidden issues before systems are concealed or handed over. -
Verification Prevents Rectification
Early identification and correction of defects dramatically reduces the likelihood of costly future remediation works. -
Invisible Doesn’t Mean Compliant
A waterproofing system may appear visually complete while still containing critical defects that compromise long-term performance.
-
-
Mandatory Compliance Documentation
Waterproofing works should be supported by compliant certification, inspection records, testing outcomes, and installation documentation. -
Waterproofing Certificates
Certificates should identify the installed system, application areas, products used, relevant standards, installation dates, and responsible licensed contractor. -
Inspection + Testing Records
Compliance documentation should include overlay inspections, flood testing outcomes, membrane verification, curing confirmation, and defect assessments where applicable. -
Photographic Verification
Photographic records provide evidence of substrate preparation, detailing, membrane application, penetrations, waterstops, terminations, and completed works before concealment. -
Product + System Traceability
Technical data sheets, batch information, product specifications, and compatible system details help verify correct material selection and installation compliance. -
NCC + Australian Standards Alignment
Reports and certification should demonstrate compliance with NCC provisions and relevant Australian Standards. -
Handover + Warranty Records
Completion documentation should include warranties, maintenance recommendations, certification, testing results, and digital records for future reference and asset protection. -
Clear Accountability
Proper reporting creates traceability across the project lifecycle—ensuring installation methods, inspections, testing, and compliance obligations are fully documented.
-
Waterproofing works in Australia must comply with the NCC and relevant Australian standards and can only be done by qualified and licensed contractors. In QLD, this is a QBCC license.
Licensed professionals ensure all works meet these requirements—protecting the building, maintaining compliance, and reducing risk of defects and non-conforming work.
